制作我们自己的Ebay(拍卖系统)(6)
日期：2011-01-22 浏览次数：20837 次
Resolving Bids - Page 6
Chris Payne
September 11, 2000
Function ResolveBids(ItemID)
'Set variables and create objects
dim monIncrement, monHighPrice, intAvailable, intTotItems, flgQuit
dim blnResolved
'Assume bids are resolved
blnResolved = True
strConnectionString = "DSN=MyAuction;UID=username;PWD=password;Database=MyAuctionDB"
set rst = Server.CreateObject("ADODB.Recordset")
'Get information from items table
strSQL = "SELECT Increment, Available FROM tblAuctionItems WHERE " & _
"IID = " & ItemID
rst.open strSQL, strConnectionString
monIncrement = rst(0)
intAvailable = rst(1)
rst.close
'Find the highest bid and total number items bid for
strSQL = "SELECT max(WinPrice) AS WinPrice, sum(WinItems) as " & _
"WinItems FROM tblAuctionBids WHERE " & _
"ItemID = " & ItemID
rst.open strSQL, strConnectionString
monHighPrice = rst(0)
intTotItems = rst(1)
rst.close
'If a user with a higher max bid exists, then
' update their bid if and only if available items is exceeded
strSQL = "SELECT MaxBid, UID, BidItems, WinPrice FROM " & _
"tblAuctionBids WHERE ItemID = " & ItemID
rst.open strSQL, strConnectionString
if not rst.eof then
do until rst.eof
if (rst(0) > monHighPrice + monIncrement) AND (intTotItems > intAvailable) & _
AND (rst(3) <> monHighPrice) then
monHighPrice = monHighPrice + monIncrement
call DoBids(ItemID, rst(1), monHighPrice)
blnResolved = False
end if
rst.MoveNext
'If we're at the end of the recordset
and the bids are not yet resolved, go back to the beginning
if not blnResolved AND rst.eof then
rst.MoveFirst
blnResolved = True
end if
loop
end if
rst.close
End Function
The main part of the above code is the last do...loop section. The process is as follows:
Enter a user's bid (using the DoBids() function)
Find the highest bid for the item, and total number of items bid for
Loop through database and:
IF the current bidder's maximum bid is higher than the highest winning bid,
AND the total number of items bid for is greater than the number of items available,
AND the current bidder's bid is not the highest bid,
THEN increment the current bidder's bid by the increment value.
If we reach the end of the recordset, and the bids are still not resolved, the start over.
This process will automatically update all bids appropriately, and weed out those whose max bids are not
high enough. The reason we check to make sure the total number of items bid for is greater than the number
of total items available in step 4 is because if all bids are placed and items claimed, and there are
still lots available, then everyone wins and bids do not need to be incremented.
For example, imagine there are 10 lots available, and there are 3 bidders. If bidder A wants 3 lots at $3,
bidder B wants 3 lots at $2, and bidder C wants 3 lots at $1, everyone will win because there is enough
lots to go around, and then some. The do loop above will only have to go through once.
However, suppose bidder C now wants 5 items. Since there are not enough items to go around, someone will
have to lose out. The loop in the code above weeds this person out by checking max bids and updating the
winning bids. If everyone's max bids in this scenario was $20, and the increment was $2, then bidder C and
whichever of bidder A and B placed the first bid would win (remember that bid priority is placed on most
lots bid for, followed by bid time).
Chris Payne
September 11, 2000
Function ResolveBids(ItemID)
'Set variables and create objects
dim monIncrement, monHighPrice, intAvailable, intTotItems, flgQuit
dim blnResolved
'Assume bids are resolved
blnResolved = True
strConnectionString = "DSN=MyAuction;UID=username;PWD=password;Database=MyAuctionDB"
set rst = Server.CreateObject("ADODB.Recordset")
'Get information from items table
strSQL = "SELECT Increment, Available FROM tblAuctionItems WHERE " & _
"IID = " & ItemID
rst.open strSQL, strConnectionString
monIncrement = rst(0)
intAvailable = rst(1)
rst.close
'Find the highest bid and total number items bid for
strSQL = "SELECT max(WinPrice) AS WinPrice, sum(WinItems) as " & _
"WinItems FROM tblAuctionBids WHERE " & _
"ItemID = " & ItemID
rst.open strSQL, strConnectionString
monHighPrice = rst(0)
intTotItems = rst(1)
rst.close
'If a user with a higher max bid exists, then
' update their bid if and only if available items is exceeded
strSQL = "SELECT MaxBid, UID, BidItems, WinPrice FROM " & _
"tblAuctionBids WHERE ItemID = " & ItemID
rst.open strSQL, strConnectionString
if not rst.eof then
do until rst.eof
if (rst(0) > monHighPrice + monIncrement) AND (intTotItems > intAvailable) & _
AND (rst(3) <> monHighPrice) then
monHighPrice = monHighPrice + monIncrement
call DoBids(ItemID, rst(1), monHighPrice)
blnResolved = False
end if
rst.MoveNext
'If we're at the end of the recordset
and the bids are not yet resolved, go back to the beginning
if not blnResolved AND rst.eof then
rst.MoveFirst
blnResolved = True
end if
loop
end if
rst.close
End Function
The main part of the above code is the last do...loop section. The process is as follows:
Enter a user's bid (using the DoBids() function)
Find the highest bid for the item, and total number of items bid for
Loop through database and:
IF the current bidder's maximum bid is higher than the highest winning bid,
AND the total number of items bid for is greater than the number of items available,
AND the current bidder's bid is not the highest bid,
THEN increment the current bidder's bid by the increment value.
If we reach the end of the recordset, and the bids are still not resolved, the start over.
This process will automatically update all bids appropriately, and weed out those whose max bids are not
high enough. The reason we check to make sure the total number of items bid for is greater than the number
of total items available in step 4 is because if all bids are placed and items claimed, and there are
still lots available, then everyone wins and bids do not need to be incremented.
For example, imagine there are 10 lots available, and there are 3 bidders. If bidder A wants 3 lots at $3,
bidder B wants 3 lots at $2, and bidder C wants 3 lots at $1, everyone will win because there is enough
lots to go around, and then some. The do loop above will only have to go through once.
However, suppose bidder C now wants 5 items. Since there are not enough items to go around, someone will
have to lose out. The loop in the code above weeds this person out by checking max bids and updating the
winning bids. If everyone's max bids in this scenario was $20, and the increment was $2, then bidder C and
whichever of bidder A and B placed the first bid would win (remember that bid priority is placed on most
lots bid for, followed by bid time).
免责声明： 本文仅代表作者个人观点，与爱易网无关。其原创性以及文中陈述文字和内容未经本站证实，对本文以及其中全部或者部分内容、文字的真实性、完整性、及时性本站不作任何保证或承诺，请读者仅作参考，并请自行核实相关内容。
