驱动编译遇挫，求大虾帮忙
飞凌Linux3.0.1里的drivers里找出来的led驱动，驱动没问题，仅作参考，主要是把C文件拿到内核外用我的Makefile编译，会出错，求解决
#include <linux/miscdevice.h>
#include <linux/delay.h>
#include <asm/irq.h>
//#include <mach/regs-gpio.h>
#include <mach/hardware.h>
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/init.h>
#include <linux/mm.h>
#include <linux/fs.h>
#include <linux/types.h>
#include <linux/delay.h>
#include <linux/moduleparam.h>
#include <linux/slab.h>
#include <linux/errno.h>
#include <linux/ioctl.h>
#include <linux/cdev.h>
#include <linux/string.h>
#include <linux/list.h>
#include <linux/pci.h>
#include <asm/uaccess.h>
#include <asm/atomic.h>
#include <asm/unistd.h>

#include <mach/map.h>
#include <mach/regs-clock.h>
#include <mach/regs-gpio.h>

#include <plat/gpio-cfg.h>
#include <mach/gpio-bank-e.h>
#include <mach/gpio-bank-m.h>

#define DEVICE_NAME "leds"

static long s3c6410_leds_ioctl(struct file *filp, unsigned int cmd, unsigned long arg)
{
  switch(cmd) {
  unsigned tmp;
  case 0:
  case 1:
  if (arg > 4)  
  {
  return -EINVAL;
  }
  tmp = readl(S3C64XX_GPMDAT);
   
  if(cmd==0) //close light
  {  
  tmp &= (~(1<<arg));
  }
  else //open light
  {  
  tmp |= (1<<arg);
  }

  writel(tmp,S3C64XX_GPMDAT);

  printk (DEVICE_NAME": %d %d\n", arg, cmd);
  return 0;
  default:
  return -EINVAL;
  }
}

static struct file_operations dev_fops = {
  .owner = THIS_MODULE,
  .unlocked_ioctl = s3c6410_leds_ioctl,
};

static struct miscdevice misc = {
  .minor = MISC_DYNAMIC_MINOR,
  .name = DEVICE_NAME,
  .fops = &dev_fops,
};

static int __init dev_init(void)
{
  int ret;
   
  unsigned tmp;

  //gpm0-3 pull up
  tmp = readl(S3C64XX_GPMPUD);
  tmp &= (~0xFF);
  tmp |= 0xaa;
  writel(tmp,S3C64XX_GPMPUD);

  //gpm0-3 output mode
  tmp =readl(S3C64XX_GPMCON);
  tmp &= (~0xFFFF);
  tmp |= 0x1111;
  writel(tmp,S3C64XX_GPMCON);
   
  //gpm0-3 output 0
  tmp = __raw_readl(S3C64XX_GPMDAT);
  tmp |= 0x10;
  writel(tmp,S3C64XX_GPMDAT);  

  ret = misc_register(&misc);
  printk ("\n@@@@@@@@@@@@@@@@@@@@@@@@@@\n");
  printk (DEVICE_NAME"\tinitialized\n");
  printk ("\n@@@@@@@@@@@@@@@@@@@@@@@@@@\n");

  return ret;
}

static void __exit dev_exit(void)
{
  misc_deregister(&misc);
}

module_init(dev_init);
module_exit(dev_exit);
MODULE_LICENSE("GPL");
MODULE_AUTHOR("FORLINX Inc.");


附我的Makefile文件：
obj-m := ./ok6410_leds.o
PWD := $(shell pwd)
KERNEL_LOCATION = /system/linux-3.0.1
#KERNEL_LOCATION ?= /lib/modules/$(shell uname -r)/build
all:
make -C $(KERNEL_LOCATION) M=$(PWD) modules

clean:
rm -rf *.o *~ core .depend .*.cmd *.ko *.mod.c .tmp_versions


编译时候遇到的错误如下：
[root@zhangwei zw_test]# make
make -C /system/linux-3.0.1 M=/nfs/zw_test modules
make[1]: Entering