linux 安装流媒体服务器Darwin Streaming Server
近日在做一个关于Darwin Streaming Server的项目，在网上找了一些资料，按部就班的安装，可是总会出现些错误，后来找到了一篇英文的，一路顺风！下面将其摘要出来，亲测可行：
OK, so you don’t necessarily call rtsp on Ubuntu QuickTime Streaming Server. Instead, you call it Darwin Streaming Server (DSS). But the end result is basically what you have exposed in Mac OS X Server, but running on Linux. You don’t have the same functionality in Server Admin, but it does work. And the key to what it does is use the rtsp protocol to stream supported files from the server to clients. It is a little tougher than just clicking on the start button, but too much tougher provided you follow these directions (thanks to the good folks of the DSS list that I’ve been a member of for a few years for taking such good notes, making this much simpler to write when I just have to move from Ubuntu 7 to 10.04).

To get started (most all of this is going to need sudo or su), let’s use wget to download all the files that we’re going to need (except 1):

    su
    wget http://static.macosforge.org/dss/downloads/DarwinStreamingSrvr6.0.3-Source.tar
    wget http://dss.macosforge.org/trac/raw-attachment/ticket/6/dss-6.0.3.patch
    wget http://dss.macosforge.org/trac/raw-attachment/ticket/6/dss-hh-20080728-1.patch

Now let’s extract the tar file:

    tar -xvf DarwinStreamingSrvr6.0.3-Source.tar

Now let’s create our qtss user and group:

    addgroup -system qtss
    adduser -system -no-create-home -ingroup qtss qtss

We’re going to need the build-essential package from apt-get, so let’s install that before moving on:

    apt-get install build-essential

The base 6.0.3 installer was only built for Mac OS X, so let’s apply the patches we used wget to pull down:

    patch -p0 < dss-6.0.3.patch
    patch -p0 < dss-hh-20080728-1.patch

Now let’s cd into the actual dss installer directory and then grab a patched installer file, get rid of the old Install script and then grab a new one:

    cd DarwinStreamingSrvr6.0.3-Source
    mv Install Install.old
    wget http://dss.macosforge.org/trac/raw-attachment/ticket/6/Install

Then we’ll make the Install script executable and run the Buildit (no, not Configure) then Install scripts:

    chmod +x Install
    ./Buildit
    ./Install

Finally, fire up the DSS:

    /usr/local/sbin/DarwinStreamingServer

Now you should be able to go to a standard Mac OS X client and run a port scan of the rtsp port, 554 using stroke (swap the 192.168.210.254 IP here with whatever IP or hostname that you’re using):

    /Applications/Utilities/Network\ Utility.app/Contents/Resources/stroke 192.168.210.254 554 554

DSS installs some sample movies into /usr/local/movies. Provided that the port is open, let’s open Safari and provide the following link to see if one of the stock sample movies will open:

    rtsp://192.168.210.254/sample_h264_300kbit.mp4

Provided that you see the sample movie from Apple then you can move the sample movies elsewhere and drop your own in here. You’ve now got a fully functional DSS. The DSS will stream .mov, .mp4 and .3gp files. If you enable the QTSSHttpFileModule you can also stream mp3 files. If you go into the /etc/streaming folder you will see a number of files that look similar to what you have been working with on Mac OS X Server (assuming you’ve been working with Mac OS X Server). In here, you’ll find the qtusers and qtgroups files for managing users and groups in rtsp as well as the streamin