关于mini2440根文件系统配置出现的问题,求高手解答
我按照友善之臂给的方法配置文件系统能够成功启动。但是网口在第一次启动时能够被激活，断电后再启动就又不能被激活了。请问这个应该如何配置？？？以下是部分启动信息：

第一次启动：
block 62 is bad

block 63 is bad

block 1059 is bad

block 1449 is bad

yaffs_read_super: isCheckpointed 0

VFS: Mounted root (yaffs filesystem) on device 31:3.

Freeing init memory: 152K

----------munt all----------------

run-parts: /etc/network/if-pre-up.d: No such file or directory

run-parts: /etc/network/if-up.d: No such file or directory

run-parts: /etc/network/if-pre-up.d: No such file or directory

eth0: link down

run-parts: /etc/network/if-up.d: No such file or directory

***********************************************

****************Studying ARM*********************

Kernel version:linux-2.6.32.2

Student:Chen changhao

Date:2012.4.16

***********************************************



Please press Enter to activate this console. eth0: link up, 100Mbps, full-duplex

, lpa 0xCDE1



[root@mini2440/]#



断电后再启动：
Partially written block 115 detected

Partially written block 115 detected

Partially written block 115 detected

Partially written block 115 detected

Partially written block 115 detected

Partially written block 115 detected

Partially written block 115 detected

Partially written block 115 detected

Partially written block 115 detected

yaffs_read_super: isCheckpointed 0

VFS: Mounted root (yaffs filesystem) on device 31:3.

Freeing init memory: 152K

----------munt all----------------

ifup: interface lo already configured

ifup: interface eth0 already configured

***********************************************

****************Studying ARM*********************

Kernel version:linux-2.6.32.2

Student:Chen changhao

Date:2012.4.16

***********************************************



Please press Enter to activate this console.

[root@mini2440/]#


------解决方案--------------------
已解决