linux搭建bridge
1、yum install bridge-utils
  vi /etc/sysconfig/network-scripts/ifcfg-br0
  please use the IPADDR, PREFIX, GATEWAY, DNS1 and DNS2 values from the /etc/sysconfig/network-scripts/ifcfg-eth0 file); make sure you use TYPE=Bridge, not TYPE=Ethernet:
DEVICE="br0"
NM_CONTROLLED="yes"
ONBOOT=yes
TYPE=Bridge
BOOTPROTO=none
IPADDR=192.168.0.100
PREFIX=24
GATEWAY=192.168.0.1
DNS1=8.8.8.8
DNS2=8.8.4.4
DEFROUTE=yes
IPV4_FAILURE_FATAL=yes
IPV6INIT=no
NAME="System br0"
  vi /etc/sysconfig/network-scripts/ifcfg-eth0
  Modify /etc/sysconfig/network-scripts/ifcfg-eth0 as follows (comment out BOOTPROTO, IPADDR, PREFIX, GATEWAY, DNS1, and DNS2 and add BRIDGE=br0):
DEVICE="eth0"
NM_CONTROLLED="yes"
ONBOOT=yes
HWADDR=00:1E:90:F3:F0:02
TYPE=Ethernet
#BOOTPROTO=none
#IPADDR=192.168.0.100
#PREFIX=24
#GATEWAY=192.168.0.1
#DNS1=8.8.8.8
#DNS2=8.8.4.4
DEFROUTE=yes
IPV4_FAILURE_FATAL=yes
IPV6INIT=no
NAME="System eth0"
UUID=5fb06bd0-0bb0-7ffb-45f1-d6edd65f3e03
BRIDGE=br0

/etc/init.d/network restart
修改完reboot


ifconfig查看状态