日期:2014-05-16  浏览次数:20596 次

Linux查看ip的命令详解

转:

  ifconfig

  Linux查看IP地址的命令--ifconfig

  ifconfig命令用于查看和更改网络接口的地址和参数

  $ifconfig -a

  lo0: flags=849 mtu 8232

  inet 127.0.0.1 netmask ff000000

  hme0: flags=863 mtu 1500

  inet 211.101.149.11 netmask ffffff00 broadcast 211.101.149.255

  ether 8:0:20:a7:4d:21

  系统会显示网络接口的名称,接口的状态(up or down),

  接口的IP地址和掩码等信息

  更改网络接口的IP地址:

  #ifconfig hme0 down

  #ifconfig hme0 211.101.149.233 netmask 255.255.255.0 up

  首先,使用down命令参数把网络接口hme0的服务暂时停止,然后再用Linux查看ip的ifconfig命令给

  接口分配新的IP地址和掩码,并启动网络接口服务

  也可以通过改变文件/etc/hosts中的IP地址的值并重新启动系统来更改机器的IP地址。

  /etc/hosts/: 211.101.149.11?? sampdt

  定义主机名在/etc/hostname.hme0及IP地址。

  更改了网卡/增加了网卡,系统不能自动启动该接口服务,这时需要手动创建网口服务:

  #ifconfig hme0 plumb

  Linux查看ip即可以为接口le0创建网口服务

  相应地,用ifconfig带unplumb参数可以停止服务并关闭网络.

  netconfig 用来设置IP地址